When installing a metal fence post, you must first dig a hole to fit. This is most easily done using a post hole digger, which looks like a large triangle with two rounded blade ends on each side. Idea is to drive in dirt, hold both excavators together and remove dirt. Be very careful when doing this, since it is easy to drill water and power lines that could be buried there. Go slowly, be careful. Average whole metal fence post must be eighteen to twenty-four inches deep, if possible, to give pole to accommodate enough space itself. If you do not have access to a search engine post, a thin blade work, but try to keep hole as narrow as possible.
Focus your metal fence post as best you can in hole he has dug, and pouring concrete into hole, making sure that concrete surrounds fence post metal completely. Pour carefully, and try not to mix dirt with concrete, as this may create weaknesses that may crack in future. Once fence post of metal concentrates and standing alone, you can leave only concrete set. It is vital that nothing touches pole or hole filled with concrete during this phase, or fence post twisted metal can end permanently.
12 Secret Tips To Installing Metal Fence Post Photos